Nitronik Posted January 3, 2019 Posted January 3, 2019 I always thought the gun was honestly kinda lame, so I found out a lot of the texture is unused and added a scope on top of it. Yay! 12 Quote
Cormacnoah Posted January 3, 2019 Posted January 3, 2019 I agree with this motion, makes sense to have a high powered scope on a supposed long-range revolver Quote
_chain Posted January 3, 2019 Posted January 3, 2019 Looks cool, too bad it hits like spit past 70m Quote
BrandonBranderson Posted January 3, 2019 Posted January 3, 2019 This would be great, thank you. Right now this gun is fun to use, but it's just so damn ugly with that zebra skin. If we could have it updated with this scope and enable skins for it, that would be awesome. I'd love to see the chrome skin on this. Quote
Nitronik Posted January 3, 2019 Author Posted January 3, 2019 (edited) 7 minutes ago, BrandonBranderson said: This would be great, thank you. Right now this gun is fun to use, but it's just so damn ugly with that zebra skin. If we could have it updated with this scope and enable skins for it, that would be awesome. I'd love to see the chrome skin on this. Can you imagine that happening? I haven't painted the skin RGB mask for the scope yet... wouldn't take long to wing it, but I have no access to what would let me manipulate the end-results you'd see ingame Edited January 3, 2019 by Nitronik Quote
Knite Posted January 3, 2019 Posted January 3, 2019 If this were implemented, I might actually use one to be all 3 Quote
Keshi Posted January 3, 2019 Posted January 3, 2019 looks like the blackops 4 revolver with the scope Quote
TheJellyGoo Posted January 3, 2019 Posted January 3, 2019 Some ideas for further improvement... 2 Quote
CookiePuss Posted January 3, 2019 Posted January 3, 2019 Was it harder or easier making it as blocky as the rest of APB? 1 Quote
BrandonBranderson Posted January 3, 2019 Posted January 3, 2019 18 minutes ago, Nitronik said: Can you imagine that happening? It'd be awesome for sure, but I don't know what LO's policies are regarding community collaboration. I know G1 was against it, but maybe LO is a little more open about that sorta thing. It is an asset made from their own assets after all. Quote
Nitronik Posted January 3, 2019 Author Posted January 3, 2019 (edited) 27 minutes ago, CookiePuss said: Was it harder or easier making it as blocky as the rest of APB? ironically it was harder, since I had to fit a lot of detail into even more limited UV space, all while trying to make such spike-y edges look round-- 25 minutes ago, BrandonBranderson said: It'd be awesome for sure, but I don't know what LO's policies are regarding community collaboration. I know G1 was against it, but maybe LO is a little more open about that sorta thing. It is an asset made from their own assets after all. I made the scope all on my own but I reckon the pistol was indeed made by them. Whoops! Edited January 3, 2019 by Nitronik Quote
iDontThinkSo Posted January 3, 2019 Posted January 3, 2019 This makes sense since it has lot of zooming and custom crosshair. +1 Quote
vsb Posted January 3, 2019 Posted January 3, 2019 (edited) now make a holographic reflex sight, gun accessories aren’t allowed to make sense in apb Edited January 3, 2019 by BXNNXD added stuff 1 Quote
Nitronik Posted January 3, 2019 Author Posted January 3, 2019 1 minute ago, BXNNXD said: now make a holographic reflex sight, gun accessories aren’t allowed to make sense in apb Has to be either/or . I'm tired otherwise I'd take you up on that. Quote
VickyFox Posted January 3, 2019 Posted January 3, 2019 I have no idea what GamersFirst were thinking giving HMS to a gun without a scope... We already had the Act Gold Marksman. Quote
Jazeker Posted January 3, 2019 Posted January 3, 2019 1 hour ago, Nitronik said: I always thought the gun was honestly kinda lame, so I found out a lot of the texture is unused and added a scope on top of it. Yay! Do like it. 1 hour ago, BrandonBranderson said: ugly with that zebra skin Nooo keep the zebra skin (at least as an option ). 45 minutes ago, TheJellyGoo said: Some ideas for further improvement... Client side laser aiming point.... that would be kinda amazing. (client side so ppl wont see you aiming) ^3.5? 1 1 Quote
Fortune Runner Posted January 3, 2019 Posted January 3, 2019 I like the concept idea and have wondered about this myself. Also as constructive criticism I have to point out a few inaccuracies. 1 scopes for revolvers tend to not go past half way on the barrel due to balance issues. (there are exceptions like a .50 caliber dirty harry style revolver) 2 the mounting part itself is normally around the cylinder or slightly to the front if it and normally the same size as the cylinder. I offer the criticism in hopes that you can pursue this path and improve designs whether it be APB or something else in design. Where would we be without the artwork in games? Thank you. 2 Quote
Nitronik Posted January 3, 2019 Author Posted January 3, 2019 4 minutes ago, Fortune Runner said: I like the concept idea and have wondered about this myself. Also as constructive criticism I have to point out a few inaccuracies. 1 scopes for revolvers tend to not go past half way on the barrel due to balance issues. (there are exceptions like a .50 caliber dirty harry style revolver) 2 the mounting part itself is normally around the cylinder or slightly to the front if it and normally the same size as the cylinder. I offer the criticism in hopes that you can pursue this path and improve designs whether it be APB or something else in design. Where would we be without the artwork in games? Thank you. Thank you - for this specific project I actually found references of the scope being attached to the venting ribs themselves, as for number 1 that's something I'll absolutely keep in mind for the future Quote
Knite Posted January 3, 2019 Posted January 3, 2019 12 minutes ago, Fortune Runner said: I like the concept idea and have wondered about this myself. Also as constructive criticism I have to point out a few inaccuracies. 1 scopes for revolvers tend to not go past half way on the barrel due to balance issues. (there are exceptions like a .50 caliber dirty harry style revolver) 2 the mounting part itself is normally around the cylinder or slightly to the front if it and normally the same size as the cylinder. I offer the criticism in hopes that you can pursue this path and improve designs whether it be APB or something else in design. Where would we be without the artwork in games? Thank you. The RSA is a Colt Anaconda Here's an Anaconda with a scope mounted Quote
CookiePuss Posted January 3, 2019 Posted January 3, 2019 1 minute ago, Knite said: The RSA is a Colt Anaconda Here's an Anaconda with a scope mounted Not being a gun person myself, I wonder... How far out can you effectively hit targets with a gun like that? Quote
Knite Posted January 3, 2019 Posted January 3, 2019 1 minute ago, CookiePuss said: Not being a gun person myself, I wonder... How far out can you effectively hit targets with a gun like that? It's easy enough to hit targets at 100yds without optics; Hickok45 does it frequently on his YouTube channel. Typically, large bore revolvers with optics mounted on them are used for handgun hunting, where the scope makes it much easier to acquire your target. Quote
SLICKIEM Posted January 3, 2019 Posted January 3, 2019 3 minutes ago, CookiePuss said: How far out can you effectively hit targets with a gun like that? i doubt you could use it accurately past 500 yards even with a lot of experience Quote
Knite Posted January 3, 2019 Posted January 3, 2019 4 minutes ago, SLICKIEM said: i doubt you could use it accurately past 500 yards even with a lot of experience You can do 500yds without optics if the wind is calm enough and you're experienced enough with your firearm. There's a guy who can do 500 yds with a 1911 Quote
Fortune Runner Posted January 3, 2019 Posted January 3, 2019 2 minutes ago, Knite said: The RSA is a Colt Anaconda Here's an Anaconda with a scope mounted That's why I also mentioned there are exceptions. Thanks for pointing out the details for people. Quote
CookiePuss Posted January 3, 2019 Posted January 3, 2019 43 minutes ago, Fortune Runner said: Oh hey, that's very interesting. Thanks for posting that! ftfy 44 minutes ago, Knite said: You can do 500yds without optics if the wind is calm enough and you're experienced enough with your firearm. There's a guy who can do 500 yds with a 1911 Holy shit, that's freaking impressive. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.